Revisions for the 2023 National Electrical Code (NEC) - Part 2
In Revisions for the 2023 National Electrical Code - Part 2, you'll learn ...
- The “need to know” changes in the 2023 National Electrical Code®
- Understand how to use the Code and become familiar with many of the existing requirements
- Familiarize the student with the significant changes in the 2023 edition of NFPA 70®, the National Electrical Code®
Overview
This course is intended to familiarize the reader with the major changes contained in the 2023 National Electrical Code®. These are the “need to know” changes. The document is heavily illustrated to enable effective and efficient visual learning. The course addresses Code revisions that apply to all types of occupancies: residential, commercial, and industrial. The course is divided into 3 parts:
- Part 1: Code-wide changes through Article 240
- Part 2: Article 250 through Article 500
- Part 3: Article 512 through Annex E
The layout and the method of this presentation will enable new Code users to easily navigate through the changes.
Those well experienced in the Code will find depth in the coverage.
Through the heading(s) at the beginning of each Code change addressed in the document, the reader will readily identify the section affected by the change and the specific subject being discussed.
The Significance section sets the stage. An Analysis of the Code change follows, with explanation where necessary to help the student understand the revision, its background, and the logic of the change.
Graphics, photographs, examples, or calculations are used to illustrate the change and to enhance learning. The Summary is a brief re-statement of the highlights of the Code change.
An Application Question with answer is included at the end of some Code sections studied for exercise in applying the change. Some of the sections analyzed contain a Code Refresher that addresses existing Code requirements related to the change. General Code information and rules are weaved into the writing throughout the document. The author’s writing method attempts to provide general Code study and a Code refresher through discussion of the Code changes. NFPA 70E®, Electrical Safety in the Workplace, is briefly discussed and referenced several times within the course.
Although there are many references to the 2023 NEC® throughout this document, the course and quiz can be completed without the need to refer to the NEC® itself. However, the learning experience will be enhanced by referring to the NEC® as the course is completed. For further study on any Code section within this course, the full text of the 2023 NEC® should be consulted.
You can read the 2023 NEC® online at the following site, courtesy of NFPA:
https://www.nfpa.org/NEC/electrical-codes-and-standards/NFPA-70?code=70
Specific Knowledge or Skill Obtained
This course teaches the following specific knowledge and skills:
- Familiarize the student with the significant changes in the 2023 edition of NFPA 70®, the National Electrical Code®
- Familiarize the student with the major changes in the rules for ground-fault circuit interrupters (GFCIs) and for other grounding and bonding applications
- Familiarize the student with the new requirements for branch circuits
- Familiarize the student with Code changes related to alternative energy and new technologies
- Understand how to use the Code and become familiar with many of the existing requirements
- Ensure compliance with applicable Code standards for plans and specifications prepared by the student
- Enable the student to identify a Code section(s) where additional study may be appropriate for the student’s practice
- Introduce the student who is not familiar with NFPA 70® to some of the regulations for safeguarding persons and property from hazards arising from the use of electricity
- Make the student aware of the new articles incorporated into the Code and the scope of the information in these articles
- Re-acquaint students who use the Code infrequently with some of the basic safety requirements and areas of coverage of the NEC®
- Introduce the student to NFPA 70E®, Electrical Safety in the Workplace
Certificate of Completion
You will be able to immediately print a certificate of completion after passing a multiple-choice quiz consisting of 15 questions. PDH credits are not awarded until the course is completed and quiz is passed.
This course is applicable to professional engineers in: | ||
Alabama (P.E.) | Alaska (P.E.) | Arkansas (P.E.) |
Delaware (P.E.) | District of Columbia (P.E.) | Florida (P.E. Area of Practice) |
Georgia (P.E.) | Idaho (P.E.) | Illinois (P.E.) |
Illinois (S.E.) | Indiana (P.E.) | Iowa (P.E.) |
Kansas (P.E.) | Kentucky (P.E.) | Louisiana (P.E.) |
Maine (P.E.) | Maryland (P.E.) | Michigan (P.E.) |
Minnesota (P.E.) | Mississippi (P.E.) | Missouri (P.E.) |
Montana (P.E.) | Nebraska (P.E.) | Nevada (P.E.) |
New Hampshire (P.E.) | New Jersey (P.E.) | New Mexico (P.E.) |
New York (P.E.) | North Carolina (P.E.) | North Dakota (P.E.) |
Ohio (P.E. Self-Paced) | Oklahoma (P.E.) | Oregon (P.E.) |
Pennsylvania (P.E.) | South Carolina (P.E.) | South Dakota (P.E.) |
Tennessee (P.E.) | Texas (P.E.) | Utah (P.E.) |
Vermont (P.E.) | Virginia (P.E.) | West Virginia (P.E.) |
Wisconsin (P.E.) | Wyoming (P.E.) |