|
This course caters, mainly, to Engineers, Technicians and Facilities Managers who are not intimately familiar with Electrical Engineering Principles and Practices.
Through this course, attendees are expected to learn basic principles of electricity in a simple, easy to
understand format. This course will enable attendees to accomplish straightforward and common calculations associated with voltage, current, power and power factor.
Charts and tables, as alternate means for current, voltage and power estimation, will be presented. Practical examples of electrical applications, in industrial settings, will be covered. Electrical, equipment, components, devices and test instrumentation will be discussed. Important concepts in electrical safety will be introduced.
In this 8 hour web-based
seminar, you'll learn....
-
Principles of Electricity, AC and DC
-
Electrical Code and Safety
-
Electrical Equipment and Instrumentation in Industrial Applications. This would include motors, transformers, switchgear, protection devices, power/energy monitoring
systems
-
Electrical Control Systems; i.e. PLC’s, Relay Ladder Logic, Drives and Sensors, examples of automation systems, including AGV’s and
robots
-
Understanding Electrical Drawings and Documentation
-
Understanding Electrical Power Bills and Ways to Reduce the Energy Cost
To attend
this web seminar, you'll
need a computer with a high speed internet connection (DSL or
cable modem) and a phone line. For your comfort, it is recommended that
you use a speaker phone to connect to the web seminar.
Online registration ends
1 hour prior to
the seminar, however phone registration can be accepted up to 10 minutes
before the webinar begins. Please call 877 500-7145 (toll free) for
last-minute registration. Seminars fill up fast. Register early to reserve
your spot!
|
Accessing the Web Seminar |
Twenty-four hours prior
to the webinar, you will be emailed a web address for the webinar. On
the day of the seminar, simply go to the website provided in the e-mail (you
should be able to just click on the link in the e-mail). You will be
asked to enter your name and e-mail address. And you will need to
enter the password that was also sent to you in the e-mail. Once you
have logged in, a screen will pop up with the toll-free number to call.
Please try to log in at least 5 minutes prior to the webinar as we will
start promptly.
|
Printing Your Certificate |
After completion of the web seminar, you will
need to fill out a short online questionnaire to access your certificate of
completion. The questionnaire can be accessed immediately after the
seminar through your login account. In the questionnaire, you will
assess how well the seminar achieved the stated learning objectives.
You may cancel your enrollment in this web
seminar up to 48
hours prior to the seminar with a full refund, minus a $10 registration
service fee. Cancellations made less than 48 hours prior to the
seminar, but at least 4 hours prior to the seminar will not be refunded, but
will be credited towards future seminars. Cancellations made less than
4 hours prior to the seminar are not refundable.
Web seminars earn PDH credits for engineers in
all states, unless specifically stated otherwise in the literature for a
specific seminar. PDHengineer.com is an approved provider of
continuing education for engineers. For more details, check out your state requirements.
ATTENTION
NEW YORK ENGINEERS: This web seminar has been accepted by the
state licensing board and will fulfill the "live course" requirement.
|
